Home page

Drum Chipper

The chipper is a special equipment for the production of wood chips. It is widely used in particleboard factories, medium, high and density fiberboard factories, straw factories, biological power plants, wood chip factories, etc. and the material preparation section in the production of manufacturers. former preferred device. This product has advanced structure, good quality of cutting chips, wide adaptability of raw materials, and convenient operation and maintenance. The main raw materials for cutting are small-diameter wood, wood harvesting and processing residues, etc., and can also be used to cut non-wood materials (such as sugar cane, bamboo, reed, etc.).

Category:

Drum Chipper

Key words:

Drum Chipper

Inquiry

Drum Chipper

Product Brief:

The machine consists of body, knife roller, upper and lower feeding rollers, conveyor belt, hydraulic system and other parts. The body is welded with high-strength steel plates, which is the support foundation of the whole machine.

Hydraulic system: supplied by the oil pump to the oil cylinder, the cover can be activated to facilitate the replacement of the blade, and the upper feeding roller assembly can be lifted during maintenance, which is convenient for adjusting the gap between the flying knife and the bottom knife and the dismantling of the comb plate. Pack.

Technical parameters:

Model	HL216	HL217	HL218
Roller Diameter (mm)	650	650	650
Number of blades (slices)	2-3	2-3	3-5
Inlet size (mm)	240x540	240x700	320x700
To roll speed (r/min)	590	590	560
Feed speed (m/min)	38	38	38
Maximum diameter of processing material (mm)	200	200	300
Wood chip length (mm)	20-35	20-35	20-35
Production capacity (tons/hour)	5-8	8-12	8-15
Main motor power (kW	55	75	110
Weight (tons)	4.07	5.2	7
Dimensions (mm)	1980x1950x1250	2300x2150x1500	2300x2150x1500